NSK B Class Autoclave – More Safety, More Capacity
Air turbines, contra-angles and other dynamic dental instruments consist of high-precision micro mechanisms and therefore benefit from careful sterilisation to maintain performance. NSK chose to use a highly conductive copper chamber to satisfy class B, Australian and New Zealand’s strictest sterilisation standard. The system delivers outstanding efficiency despite its large capacity.
More capacity with unique tray and rack system.
More efficient drying phase
More economical and environmentally friendly.
Gentle handpiece sterilisation
NSK’s innovative heating system optimizes the high heat conductivity of copper. Enveloping the copper chamber is a special heater which is also used in satellites, incorporating electro-thermal material embedded in silicone to heat the entire chamber evenly without heat loss. Adaptive Heat System
NSK’s innovative heating system optimizes the high heat conductivity of copper. Enveloping the copper chamber is a special heater which is also used in satellites, incorporating electro-thermal material embedded in silicone to heat the entire chamber evenly without heat loss. Designed to Boost Product Reliability
Consistent temperatures inside the chamber eliminate fluctuation stresses and reduce the risk of problems. NSK initially reviewed product reliability to ensure safe treatment. There are three temperature sensors to control temperatures in the iClave plus. An annual maintenance service alert helps prevent breakdowns and boosts product reliability. Intuitive
With a sophisticated design and excellent visibility, the panel is easy to operate
and maintain, with colours changing according to conditions, enhancing
Text Colours – a quick visual of what is happening
White: selection screen.
Yellow: During operation.
Green: Sterilisation complete.
Cycle Data Recording & Tracking
All sterilisation cycles are recorded on a USB flash drive, and no special software is required to view and print records of all cycles. The system records all relevant cycle parameters against a unique date and time stamp. A barcode label printer is also available, allowing you to track sterile instruments with patients.
Sonoswiss operation of ultrasound equipment:
The settings of time, temperature, and the special features are simple.
The displays of the target and actual values are easy to read.
The special functions are indicated by diodes.
With the new Assistina TWIN waiting time during the oil service is a thing of the past. It is the first reprocessing device to be equipped with two process chambers that can be used alternately, thus allowing non-stop loading. Relaxed maintenance more effective than ever!
The Assistina TWIN performs your instrument maintenance quicker than ever before. Through the innovative oil nebulization technology, W&H has been able to reduce the maintenance process to a record time of just 10 seconds. For lightning quick and incomparably thorough results.
The oil is first nebulized before being blasted through the instrument at high pressure. This removes contamination from the inside of the instrument even more effectively. The fine mist this produces coats even the most remote parts of the gears without any need for the gearing components to be set in motion first. All aerosols are eliminated from the process chambers via active suction and an integrated HEPA filter.
The Assistina TWIN adapts to the specific requirements of your practice. It can process up to 360 instruments per hour with the innovative processing procedure with the short processing time and also the ergonomic design with a wide range of adaptors.
Thanks to the smart process monitoring, the Assistina TWIN always performs the maintenance thoroughly and with minimal consumption. The Assistina TWIN Care Set does not need to be replaced until after approximately 2,800 instruments. The maintenance of your instruments can be performed not only reliably and quickly, but also more cost-effectively than ever before.
[sf_modal header="Request a Quote" link_type="button" link_text="Modal link" btn_colour="accent" btn_type="standard" btn_size="large" btn_icon="" btn_text="Request a Quote"]
[gravityform id="4" title="false" description="false"]