With the new Assistina TWIN waiting time during the oil service is a thing of the past. It is the first reprocessing device to be equipped with two process chambers that can be used alternately, thus allowing non-stop loading. Relaxed maintenance more effective than ever!
The Assistina TWIN performs your instrument maintenance quicker than ever before. Through the innovative oil nebulization technology, W&H has been able to reduce the maintenance process to a record time of just 10 seconds. For lightning quick and incomparably thorough results.
The oil is first nebulized before being blasted through the instrument at high pressure. This removes contamination from the inside of the instrument even more effectively. The fine mist this produces coats even the most remote parts of the gears without any need for the gearing components to be set in motion first. All aerosols are eliminated from the process chambers via active suction and an integrated HEPA filter.
The Assistina TWIN adapts to the specific requirements of your practice. It can process up to 360 instruments per hour with the innovative processing procedure with the short processing time and also the ergonomic design with a wide range of adaptors.
Thanks to the smart process monitoring, the Assistina TWIN always performs the maintenance thoroughly and with minimal consumption. The Assistina TWIN Care Set does not need to be replaced until after approximately 2,800 instruments. The maintenance of your instruments can be performed not only reliably and quickly, but also more cost-effectively than ever before.
Validated process in three steps. The instrument preparation with Assistina 3x3 is carried out in three steps. The complete process is validated and confirmed by expert opinion.
Automatic internal cleaning of the spray channels and transmission parts with W & H Active fluid. Blowing through spray channels and transmission parts with compressed air.
Automatic external cleaning of the instrument with W & H Active fluid.
Lubrication of the transmission parts with W & H Service Oil F1.
[sf_modal header="Request a Quote" link_type="button" link_text="Modal link" btn_colour="accent" btn_type="standard" btn_size="large" btn_icon="" btn_text="Request a Quote"]
[gravityform id="4" title="false" description="false"]
HS stands for High Speed. Producing approximately 4 litres of distilled water in 3.5 hours – even Faster when filled with warmer water. Ordinary tap water is heated to 100° C in a stainless-steel boiling chamber, killing bacteria, cysts and viruses that may be present. As the water temperature rises, low boiling light gases are discharged through the gaseous vent. Steam rises leaving behind dissolved solids, salts, and all other contaminants. The Steam is then condensed in a stainless-steel coil. The water is collected in the four-litre storage bottle (included). The lift-off top provides easy access into the seamless, stainless steel container.
Pure steam distilled water produces high quality water consistently, and is a fraction of the cost of bottled water, virtually paying for itself many times over when compared to bottled water purchases. 2 Year Warranty.